Syrup Filling Machine/Filling Stoppering Capping Machine,
|FOB Price:||US $2,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $2,000/ Piece|
|Transport Package:||Plywood Case|
- Model NO.: TOFSC-3-1-1
- Automatic Grade: Fully Automatic
- Filling Valve Head: Multi-Head
- Dosing Device: Plunger
- Packaging Container Lifting Structure: Chute Lifting
- Packaging: Bottle
- Trademark: THE ONE
- Origin: China
- Type: Volumetric Filling Machine
- Material Type: Paste
- Feed Cylinder Structure: Multi-Room Feeding
- Filling Principle: Pressure
- Structure: Rotary
- Packaging Material: glass, plastic, metal
- Specification: CE, GMP
- HS Code: 8422400000
From the appearance of the filling machine, we know bottles are feeded through Φ 700MM turn table and then come to filling machine by conveyor. Automatic filling, automatic inner stopper down, automatic outer cap down and automatic cap screwing. This filling machine not only can fill non viscosity liquid, but also the one with high viscosity. The diagram is as the below 2.0:
Machine Working Principle:
--Put bottles on turn table; Bottles will be transferred to conveyor one by one.
--Bottles are transferred to filling machine one by one by conveyor.
--Bottle sensor will check if there is bottle, then it send signal to inner control system to make filling with bottle and non-filling without bottle.
--Check the bottle and fill.
--Bottles after filling come to next inner-stoppers-down device.
--Bottles with inner stoppers come to next outer-cap-down operation.
--Bottles with outer caps come to next cap-screwing operation.
--Bottles after screwing are pulled by bottles-pulling-rod to conveyor.
Basic technical parameters:
--Filling dosage: 30-50ml
--Volume of production: 50-55 b/min 2 to 3 times filling
--Filling dosage: 100ml
--Volume of production: 40-45 b/min 3 times filling
--Filling dosage accuracy: ≥ 99%
--Inner-stopper-down yield: ≥ 99%
--Outer-cap-down yield: ≥ 99%
--Main machine power: 2.2KW 220V Infinitely variable speeds (explosion-proof motor)
--Screwing by pneumatic motor
Note: Customer needs to equip compressed air system by himself. Requirement is as below: Pressure≥ 4Kg/cm2, Rate of flow: 0.11m3/min. Compressed air should be filtered and purified before coming to machine.
|Filling dosage|| 30-50ml|
|Volume of production|| 50-55 b/min 2 to 3 times filling|
|Filling dosage|| 100ml|
|Volume of production|| 40-45 b/min 3 times filling|
|Filling dosage accuracy|| ≥ 99%|
|Inner-stopper-down yield|| ≥ 99%|
|Outer-cap-down yield|| ≥ 99%|
|Main machine power|| 2.2KW 220V Infinitely variable speeds (explosion-proof motor)|